Products by application
Every grade in the portfolio, grouped by the job it does — from concrete and cement to blasting, well cementing, biomass fuel and industrial processing.
Concrete & ready-mix
Supplementary cementitious materials that raise strength, durability and workability while reducing cement content.
Fly Ash
Highest-volume SCM in the portfolio; reduces clinker factor and heat of hydration.
ASTM C618 · IS 3812 · BS EN 450 CRM-02Ultra Fine Fly Ash
Finer classified fraction for high-performance concrete mixes.
ASTM C618 · IS 3812 CRM-03Ground Granulated Blast Furnace Slag (GGBFS)
50–80% cement replacement in mass and marine concrete.
ASTM C989 · EN 15167-1 · BS 6699 · IS 12089 CRM-04Ultra Fine Slag
Higher surface area slag for durability-critical structures.
ASTM C989 · IS 12089 CRM-05Micro Silica (Silica Fume)
Particles ~100× smaller than cement; the strongest densifier in the range.
85–98% SiO₂ · highly pozzolanic BIO-02Rice Husk Ash (RHA)
Amorphous silica pozzolan from controlled husk combustion.
High-silica pozzolanCement manufacturing
Clinker substitution materials for general-purpose and blended cement production.
Marine & sulfate exposure
Low-permeability binders for structures exposed to chlorides and sulphates.
Ground Granulated Blast Furnace Slag (GGBFS)
50–80% cement replacement in mass and marine concrete.
ASTM C989 · EN 15167-1 · BS 6699 · IS 12089 CRM-04Ultra Fine Slag
Higher surface area slag for durability-critical structures.
ASTM C989 · IS 12089 CRM-05Micro Silica (Silica Fume)
Particles ~100× smaller than cement; the strongest densifier in the range.
85–98% SiO₂ · highly pozzolanicSurface preparation & blasting
Expendable and recyclable abrasives for descaling, profiling, peening and finishing.
Copper Slag Grit
Standard expendable media for shipyard and structural steel blasting.
ISO 11126-3 · ASTM D7737 · REACH & RoHS ABR-02Garnet Sand
Low-dust natural abrasive, also used in waterjet cutting.
Natural almandine garnet ABR-03Glass Grit / Glass Beads
Non-metallic media for cleaning and satin finishing.
Silica-free glass media ABR-04Steel Shot
High recyclability lowers cost per square metre on fixed blast rooms.
ISO 11124-3 · SAE J444 & J827 · SSPC AB-3 ABR-05Steel Grit
Angular metallic media for aggressive surface profiling.
ISO 11124-3 · SAE J444Soil stabilization & roads
Materials that enhance load-bearing capacity in road subgrades and soil stabilization.
Oil & gas well cementing
Well cementing additives that reduce permeability under harsh downhole conditions.
Refractory & ceramics
High-silica and lightweight materials for heat-resistant products.
Biomass fuel
Rice-milling by-products supplied as biomass fuel and for ash production.
Rice Husk
Biomass fuel and raw feed for ash production.
Rice milling by-product BIO-02Rice Husk Ash (RHA)
Amorphous silica pozzolan from controlled husk combustion.
High-silica pozzolan BIO-03Carbonized Rice Husk Ash (CRHA)
Carbon-rich ash for soil conditioning and industrial uses.
Controlled carbonisationMass concrete — dams & foundations
High cement-replacement binders that limit heat of hydration in large pours.
Bricks & blocks
Fly ash for bricks and blocks, reducing environmental impact.
Animal feed & oil extraction
Rice bran in feed and oil-extraction grades.
Industrial processing
Bulk mineral acids supplied in compliant packaging for industrial processing.
Send us the specification.
We'll quote the material and the freight.
Include grade, quantity, packaging and destination port. Quotations are returned with applicable standards and lead time.